Electronic Torque Wrench E-Torc/A without reference arm

Developed using the latest knowledge of fastener technology. In order to meet the very high standards of torque control and documentation of screwing processes, the E-Torc/A has been developed. The electronic hardware is accommodated in a robust, slim Aluminium housing. The holding tube of the bending bar is made of Carbon Fibre (from 10 N•m).

The simple and clear operation of the E-Torc/A and its very high measurement accuracy guarantee high precision fastening, the overload recognition with signal recognition a safe and reliable production. You can tighten single as well as several screwing with a number of varying parameters in series which will be automatically stored and documented in detail.

The microprocessor-controlled E-Torc/A is to be laid out with 5 models at a working range of 2 – 800 N•m for controlled bi-directional tightening. Its large working range and the different tool fittings as well as the rotatable housing (at 120°) with a clear LC graphic display enable flexible working.

The torque wrench is equipped with a bi-directional RS 232 series interface as connection to the PC or printer and a visual, acoustic and sensory signalling when the set torque is achieved. Its high measurement accuracy of +/- 1% and +/- 1° tolerance for all indicated values (+/- 1 Digit), enables the E-Torc/A an universal use in all areas of industrial manufacturing.

Optionally on request: the software of the E-Torc/A can be modified to customer’s approval (e.g. First movement, Yield point, loosening torque features, graphical evaluation of results). An optionally wireless transmitter e.g. via bluetooth or an infrared transmitter enable a comprehensive and complete documentation of the measured value. (Software integrated in the torque wrench)